Lifting station type ABS Synconta 901B and 902B

Below-ground solutions for all your pumping needs

The Synconta 901B and 902B is a single or double pumping station, ideal for automatic pumping of wastewater and sewage from locations and areas below the backwash level in accordance with EN 12050-1 and where gravity discharge into the sewer is not possible.

MAIN BENEFITS

Designed as a complete wastewater sump, and for fitting with pumps from the Piranha, AS and MF ranges

Simple pump installation and maintenance—no need to enter the sump

Pump seals automatically onto the discharge line when lowered into the high-level coupling, irrespective of the inflow or direction of the discharge lines

MAIN APPLICATIONS

Sewage and wastewater containing fecal matter

For more aggressive applications a full stainless-steel option is available

  1. Submersible grinder pump type ABS Piranha with shredding system hydraulics can cut wastewater containing solids and pump it through small diameter discharge lines from 1¼”
  2. A concrete cover is available for areas where there can be either pedestrian or vehicular traffic (available as an accessory). The tank can be fitted with a plastic lockable lid where installations are removed from all forms of traffic e.g. garden flower beds.
  3. Level control is by one of three options; pressure pipe, float switch or float sensor
  4. Four inflow ports (3 x DN 150, 1 x DN 200) for DIN push-on connection. Two DN 100 ports for venting and use as a cable duct
  5. The pipework and gate valves are made of high-quality stainless steel
  6. Stainless steel discharge pipe with 1¼” (901B), or 1½” (902B) external thread
  7. Corrosion-resistant polyethylene tank in accordance with EN 12050-1. Supplied as standard with high-level coupling and bracket, ball type non-return valve and shut-off valve

Temperatures

40° C (maximum 60° C for five minutes)

Discharge sizes

901B: 1¼”

Technical Data Sheet – Lifting Station Type ABS Synconta 901B and 902B

Synconta_901B_and_902B_TDS_EN
NEED ANY HELP?