Light drainage pump type ABS Robusta 200 C

Remove lightly aggressive water with ease

The Robusta 200 C is a plug-in submersible pump designed for internal or external applications such as pumping condensate water out of heating systems or lightly aggressive water/wastewater containing solids up to 10mm.

MAIN BENEFITS

Suitable for lightly aggressive water/wastewater

Pumps down to 3 mm when the detachable suction ring is fitted into the screen

Easy installation with Schuko plug and 10 m cable

Automatic operation with built-in float switch for reliable operation

Backflow is prevented with built-in check valve

Fits in small sumps from 300 x 300 mm

Suitable for both manual and automatic operation with the unique hand/auto switch

MAIN APPLICATIONS

Drainage water from condensate heating system

Drainage of pits and flooded cellars with lightly aggressive water/wastewater

Pumping brine from softening systems

  1. Thermal sensors
  2. Protection type IP 68
  3. High grade stainless steel rotor shaft supported in lubricated-for-life ball bearings
  4. High grade stainless steel motor housing
  5. Viton Seals
  6. Automatic or manual level control
  7. Built in check valve
  8. Hose adaptor and 10 m cable with Schuko plug included as standard
  9. Detachable suction ring. When fitted into the impeller screen allows pumping down to 3 mm (manual operation only)

Capacity

up to 8.5 m3/h

Head

up to 6.2 m

Temperature

40°C up to 60°C

Discharge size

G 1¼”

Maximum speed of rotation

2,900 rpm

Technical Data Sheet – Light Drainage Pump Type ABS Robusta 200 C

Robusta_200c_EN
NEED ANY HELP?