Lifting station type ABS Sanisett

Sump for one or two pumps

The Sanisett 1 and 2 are sumps for one or two pumps, designed for above- or below-ground use. They provide effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs from buildings and areas below the sewer level in accordance with EN 12050-2.

MAIN BENEFITS

Globular shape for extra strength, with PP-30GF manhole cover featuring floor run-off and optional odor lock with aeration and venting

Sanisett 1 for one KS version pump (Coronada, IP, Piranha, MF) or pump with built-in level control (Robusta)

Sanisett 2 for two non-KS pumps. Separate KS level control system, with support bracket for discharge line junction piece and KS float switches

Easily transported and fitted with compact dimensions that allow passage through a standard door opening

Kit available as an accessory for sealing top of tank to damp proof course

Universally adjustable in height and can be swiveled: easy to align with floor levels and tiling patterns, irrespective of the inflow or direction of the discharge lines

MAIN APPLICATIONS

Effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs

Also suitable for the pumping of sewage containing fecal matter outside of areas covered by EN when installed using Piranha pump(s)

  1. The required pump must be ordered separately and fitted. The following pumps may be used with the Sanisett: Robusta 200 W/TS, Robusta 200C W/TS, Robusta 200 W/KS, Coronada 250 W/KS, IP 900 W/KS, IP 900 D/KS, Piranha 08 W/KS, Piranha 09 W/KS, MF 154W/KS -804D/KS
  2. Suitable for use as a floor drain. Alternatively, a stainless-steel insert is available as an accessory for fitting into the manhole cover to close and seal the run-off vent
  3. Includes plastic cover for protection of the floor grating during installation work
  4. Two inflow ports (DN 100/150) at 90º offset for DIN push-on connection. One DN 70 port for venting and use as a cable duct (supplied as standard with plug/cable inlet seal)
  5. Compact, robust polyethelyne collection tank

Temperatures

40° C (maximum 60° C for five minutes)

Discharge sizes

DN 50 (R1½”)

Technical Data Sheet – Lifting station type ABS Sanisett 1 and 2

Sanisett_1_and_2_TDS_EN
NEED ANY HELP?